Continuous Position Indication
Pleiger's hydraulic continuous position sensing is based on a standardized digital positive displacement meter in combination with the CCM (Continuous Control Module) control module. This position sensing enables highly repeatable volume measurement and sets new standards in the position sensing of hydraulic actuators. Measurement takes place directly in the control line, eliminating the need for complex hydraulic circuitry to direct the oil flow into the return line. The CCM control module uses a highly complex algorithm to precisely measure the actual volume flow. Thanks to a teach-in run, the implemented self-learning mode allows any leakage-free hydraulic actuator to be used. The control system is therefore suitable for virtually all actuator sizes.
Advantages of continuous control with CCM
Universally applicable for virtually all actuator sizes
Simplest hydraulic setup with a standard 4/3-way solenoid valve
Universally applicable for virtually all line cross-sections over long line lengths
Simplest, cost-effective commissioning via self-learning mode
Signaling of a possible fault position
independent of oil viscosity and temperature in the range from -15°C to +60°C
No special hydraulic components required for temperature compensation
External control and signal processing via Modbus or Profibus DP possible
Prospekt Hydraulikstationen
PDF, 839 KB
Prospekt LDPE Hydraulikstationen
PDF, 764 KB
Flyer_Hydraulische_Antriebe
PDF, 3.6 MB
Inquiry-Form_STK_V4_Formular
PDF, 271 KB
STKG_Datenblatt_0317
PDF, 972 KB
Flyer_SH_0819_DE
PDF, 193 KB
Anfrageformular
Anfrageformular in englischer Sprache für elektro-hydraulische Antriebe (PDF, 294 KB)
Kreiselpumpen_0618_DE
PDF, 1.5 MB
Flyer_TPKR
PDF, 342 KB
Flyer Hydraulische Antriebe
Flyer für Hydraulische Antriebe (PDF, 3.6 MB)
Datenblatt ST
Datenblatt der ST-Serie (PDF, 341 KB)
Datenblatt STD
Datenblatt der STD-Serie (PDF, 313 KB)
Datenblatt STE
Datenblatt der STE-Serie (PDF, 338 KB)
Datenblatt STED
Datenblatt der STED-Serie (PDF, 342 KB)
Antriebslösung EC-68
Flyer für Antriebslösung EC-68 (PDF, 5.2 MB)
Datenblatt (doppelwirkend)
Datenblatt für EC-68 (doppeltwirkend) (PDF, 599 KB)
Datenblatt (einfachwirkend)
Datenblatt für EC-68 (einfachwirkend) (PDF, 664 KB)
Prospekt_Gießerei_10-17
PDF, 818 KB
Flyer_Centrifugal_Pumps_EN
PDF, 3.3 MB
Tank_Level_0218_EN_web
PDF, 1.9 MB
VRC_0318-EN_web
PDF, 2.0 MB
arctic_deep_temperature_EHS_web
PDF, 1.4 MB
Brochure_EHS_0518-EN
PDF, 1.6 MB
Brochure_Company_Profile_0522
PDF, 1.9 MB
Prospekt_Image_0522_DE
PDF, 1.9 MB
Brochure_Power_Plants_0418_EN
PDF, 852 KB
Hydraulic_Stations_EN_1219
PDF, 888 KB
Prospekt_Elektrohydr-Linearantriebe_0819
PDF, 887 KB
Prospekt_EC-68_DE_1021-1
PDF, 5.2 MB
Inquiry-Form_EHS_V9_Formular-1
PDF, 294 KB
Pleiger-Maschinenbau-Lieferungs-und-Zahlungbedingungen-deutsch_2024_07_01
PDF, 162 KB
Pleiger-AEB-Deutsch
PDF, 492 KB
Pleiger-AEB-English
PDF, 214 KB
Zertifikat-WHG-Fachbetrieb
PDF, 281 KB
GL_Aluminium_Casting_Alloys
PDF, 226 KB
GL_Copper_Casting_Alloys
PDF, 231 KB
rev3-ISO9001-10000405875-MSC-RvA-DEU-Chinese-20231101-20231107152116
PDF, 175 KB
rev3-ISO9001-10000405875-MSC-RvA-DEU-English-20231101-20231107151931
PDF, 170 KB
rev3-ISO9001-10000405875-MSC-RvA-DEU-German-20231101-20231107151842
PDF, 174 KB
Datenblatt-DC-_DE_1022
PDF, 1.0 MB
Data_Sheet_-_EHS-DC_0820
PDF, 472 KB
Data_Sheet_-_EC68_Power_Pack_0321
PDF, 1.1 MB
Data_Sheet_-_EC68G_Power_Pack_0321
PDF, 349 KB